ADLINK cPCI-6S10 - Manual (Page 30)

20 Hardware Platform Management
3.2 IPMI Commands
3.2.1 Standard Commands
In terminal mode, the command is enclosed by square brackets.
Each Hex number is separated by a single blank. This command
group ranges from 0x00, 0x02, 0x04, 0x06, 0x08, 0x0A, to 0x0C in
Netfn list.
Format
Request: [18 00 02]
X Byte 1: NetFn/rsLUN(00b)
X Byte 2: rqSeq/Bridge
X Byte 3: Command
X Byte 4-n: request data
Response: [1C 00 02 00]
X Byte 1: NetFn
X Byte 2: rqSeq
X Byte 3: Command
X Byte 4: Completion code
X Byte 5-n: response data
NetFn Codes:
Table 3-1: NetFn codes
Request Response Name
00 01 Chassis
02 03 Bridge
04 05 Sensor / Event
06 07 App
08 09 Firmware
0A 0B Storage
0C 0D Transport
0E 2B Reserved
2C 2D Group Extension
2E 2F OEM
30 3F Controller specific OEM/Group