ADLINK cPCI-6S10 - Manual (Page 77)

Getting Started 67
cPCI-6S10
To connect to the cPCI-6S10 IPMC debug serial port:
X Set the SW21 the cPCI-6S10 to "Console port to IPMC":
1,2 Off; 3, 4 On; see “Console Port Switch (SW21)” on
page 18
X Enter the following settings into the PuTTY Configuration
window:
Z Speed: 9600
Z Parity bit: None
Z Flow Control: None
Z All others settings default
X Click "Open" to open the PuTTY command line interface