ADLINK cPCI-6S10 - Manual (Page 27)

Specifications & Board Interfaces 17
cPCI-6S10
2.5 Switch Settings
Standalone/CMM Mode Switch (SW6)
The cPCI-6S10 comes with SW6 for user to set the blade to stand-
alone mode or CMM mode. The cPCI-6S10 can boot without CMM
in standalone mode.
Boot Select Switch (SW13)
SW13 switch is to select boot from either SPI flash or NAND flash.
Pin Function
All off Stand alone mode (default)
2 ON CMM Disable
3 ON SYSTEM# ENABLE
4 ON EJECT Close
Pin Function
1 ON Boot from SPI flash (Default)
2 ON Boot from nand flash
ON
1
2
3 4
ON
1 2