ADLINK cPCI-6S10 - Manual (Page 47)

Hardware Platform Management 37
cPCI-6S10
Command Format:
sensor thresh
id : name of the sensor for which
threshold is to be set
threshold : which threshold to set
unr = upper non-recoverable
ucr = upper critical
unc = upper non-critical
lnc = lower non-critical
lcr = lower critical
lnr = lower non-recoverable
setting : the value to set the threshold to
Example:
Set sensor “56150_TEMP”’s UNR threshold to 88
ipmitool –I lan –H 172.20.5.225 –U admin –P
admin –t 0xB8 sensor thresh “56150_TEMP” unr
88
Request Fields
1 Sensor number( FFh = reserved)
2 [7:6] – reserved
[5] – 1b = set upper non-recoverable threshold
[4] – 1b = set upper critical threshold
[3] – 1b = set upper non- critical threshold
[2] – 1b = set lower non-recoverable threshold
[1] – 1b = set lower critical threshold
[0] – 1b = set lower non- critical threshold
3 Lower non-critical threshold
4 Lower critical threshold
5 Lower non-recoverable threshold
6 Upper non-critical threshold
7 Upper critical threshold
8 Upper non-recoverable threshold