ADLINK cPCI-6S10 - Manual (Page 46)

36 Hardware Platform Management
Response Fields
Reserve Device SDR Repository
Response Fields
Set Sensor Threshold
6
Bytes to read. FFh means read entire record
1
Completion code
2 Record ID for next record, LS Byte
3
Record Id for next record. MS Byte
4:3+N Requested bytes from record
ipmitool ipmitool [parameters] raw 0x04 0x22
Terminal mode [10 00 22]
Description
This command is used to obtain a reservation ID.
Reserve ID is used by “Get Device SDR” command.
1
Completion code
2 Reservation ID, LS Byte 0000h reserved
3
Reservation ID, MS Byte
ipmitool
ipmitool [parameters] sensor thresh “sensor id”
Terminal mode [10 00 26 00 00 00 00 00 00 00 00]
Description
This command is used to set sensor threshold. We can
use ipmitool to fire this command.