Legacy ide channels, Ide master/slave, Floppy configuration – ADLINK cPCI-6965 User Manual

Page 93

Text mode
Original mode

BIOS Setup Utility

cPCI-6965

Legacy IDE Channels

When running in Compatible mode, SATA channels can be
configured as a legacy IDE channels. Use this option to elect
the location of the IDE channel.

IDE Master/Slave

Select one of the hard disk drives to configure it. Press
< Enter > to access its sub menu.

Floppy Configuration

You can use this screen to specify options for the Floppy Configu-
ration Settings. Use the up and down < Arrow > keys to select an
item. Use the < + > and < - > keys to change the value of the
selected option. The settings are described on the following
pages. The screen is shown below.

Options: Disabled, 360 KB 5 ¼”, 1.2 MB 5 ¼”, 720 KB 3 ½”,
1.44 MB 3 ½”, 2.88 MB 3 ½”.