ADLINK cPCI-6965 - Manual (Page 34)

20 Functional Description
3.2 DVI
The Silicon Image SDVO PanelLink Transmitter Sil1362 is
designed into the cPCI-6965 to convert the SDVO signal to a DVI
interface. The Sil1362A is fully compliant with Intel SDVO 1.0 and
DVI 1.0.
3.3 Super I/O
The ITE IT8712F Super I/O is on a Low Pin Count interface sup-
porting PS/2 keyboard/mouse; two 16550-compatible serial ports;
floppy drive interface; hardware monitor function to monitor CPU
voltage, CPU temperature, power supply voltages and system
temperature; and Watch Dog Timer with time resolution from mini-
mum 1 second to maximum 255 minutes.
3.4 Battery
The cPCI-6965 is provided with a 3.0V coin cell lithium battery for
the Real Time Clock (RTC). The battery socket is equipped on the
daughter board DB-6965BAT. The lithium battery must be
replaced with an identical battery or a battery type recommended
by the manufacturer. A Panasonic CR2032 is equipped on board
by default.
3.5 PMC Site
The cPCI-6965 series supports a PMC site for front panel I/O
expansion. The PMC site provides a 32bit/33MHz PCI bus link
from the Intel® ICH8M I/O Hub. The PMC site supports +3.3V and
5V signaling.