Acrosser ACE-MINI - Manual (Page 58)

Revision: 1.0
58
Timer-D Register (58h & 59h)
Bit Field Description
Software
Readable
Software
Writable
Value after
Reset
0 - 15
16 bit Timer-D up to 1 to 65535 mS. If this register is written,
the Timer-D will count down and if “0” state is reached, it will
generate an interrupt.
Yes
Yes, only if
Timer-D is
enabled
0
Timer Resolution Register (5Ch)
Acrosser default setting register value to be 55H (ms resolution) for using timer-A ~ timer-D.
Note: The resolutions for second & micro-second are reserved in further use.
De-bounce Time Register (60h ~6Ah)
These function only support after version 1.3. Setting de-bounce time for each I/O port. De-bounce range
in 1~256 ms. The value 00 means the de-bounce time is 1ms. Defaul setting is 10.
REEL Function Enable Register (70h)
Bit Field Description
Software
Readable
Software
Writable
Value
after
Reset
0
REEL Function Enable bit. 0 =
REEL Disable, 1 = REEL Enable
Yes Yes 0
1-7 Reserved