Acrosser ACE-MINI - Manual (Page 46)

Revision: 1.0
46
Interrupt Source Register (0Ch, 0Dh & 0Eh)
Bit Field Description
Software
Readable
Software
Writable
Value after
Reset
0
Interrupt Status in Port A. 0 = No Interrupt, 1 = Interrupt active.
To clear this bit, must be wrote any data to Port A as Input.
Yes No 0
1
Interrupt Status in Port B. 0 = No Interrupt, 1 = Interrupt active.
To clear this bit, must be wrote any data to Port B as Input.
Yes No 0
2
Interrupt Status in Port C. 0 = No Interrupt, 1 = Interrupt active.
To clear this bit, must be wrote any data to Port C as Input.
Yes No 0
3
Interrupt Status in Port D. 0 = No Interrupt, 1 = Interrupt active.
To clear this bit, must be wrote any data to Port D as Input.
Yes No 0
4
Interrupt Status in Port E. 0 = No Interrupt, 1 = Interrupt active.
To clear this bit, must be wrote any data to Port E as Input.
Yes No 0
5
Interrupt Status in Port F. 0 = No Interrupt, 1 = Interrupt active.
To clear this bit, must be wrote any data to Port F as Input.
Yes No 0
6
Interrupt Status in Port G. 0 = No Interrupt, 1 = Interrupt active.
To clear this bit, must be wrote any data to Port G as Input.
Yes No 0
7
Interrupt Status in Port H. 0 = No Interrupt, 1 = Interrupt active.
To clear this bit, must be wrote any data to Port H as Input.
Yes No 0
8
Interrupt Status in Port I. 0 = No Interrupt, 1 = Interrupt active. To
clear this bit, must be wrote any data to Port I as Input.
Yes No 0
9
Interrupt Status in Port J. 0 = No Interrupt, 1 = Interrupt active.
To clear this bit, must be wrote any data to Port J as Input.
Yes No 0
10
Interrupt Status in Port K. 0 = No Interrupt, 1 = Interrupt active.
To clear this bit, must be wrote any data to Port J as Input.
Yes No 0
11
Interrupt Status in Port L. 0 = No Interrupt, 1 = Interrupt active.
To clear this bit, must be wrote any data to Port J as Input.
Yes No 0
12
Timer-A Interrupt status. 0 = No Interrupt from Timer-A, 1 =
Timer-A Interrupt activ. To clear this bit, must be wrote to Timer-A
register.
Yes No 0
13
Timer-B Interrupt status. 0 = No Interrupt from Timer-B, 1 =
Timer-B Interrupt activ. To clear this bit, must be wrote to
Timer-B register.
Yes No 0
14
Timer-C Interrupt status. 0 = No Interrupt from Timer-C, 1 =
Timer-C Interrupt activ. To clear this bit, must be wrote to
Timer-C register.
Yes No 0
15
Timer-D Interrupt status. 0 = No Interrupt from Timer-D, 1 =
Timer-D Interrupt activ. To clear this bit, must be wrote to
Yes No 0