3xLOGIC VIGIL Client - Manual (Page 76)

3xLOGIC’s VIGIL Client - Users Guide Page 76
Doc# 12031914
14.2 Live Tab
The Live tab controls how the Live Viewer windows function.
Frame by Frame
Enables faster decoding of streams from MPEG4 cameras.
Note: This setting may have an adverse effect on non-MPEG4 cameras.
Transfer Motion
Block
Enables the transfer of motion block information for use with the SDK.
Note: Enabling this feature is not recommended.
Adjust Speed
Automatically
Automatically adjusts the live video speed for each camera according the number of Live Viewer
windows open and the CPU usage percentage to maintain the optimum level of video
performance.
Use Sub Stream If
Available
When enabled, if a camera has the sub stream available, the Live Viewer will open the sub
stream instead of the main stream by default.
Use Rapidstream if
Supported by DVR
If Allow Rapidstream in Client is enabled on the VIGIL Server, enable this option for the Live
Viewer to open the Rapidstream instead of the main stream by default.
Automatic Select
Main Stream In
Single Layout
When enabled, if a camera has the sub stream being displayed in a multi layout, when the
camera is switched to a single layout, the main stream will be displayed. This affects both the
Classic Mode Live Viewer and the virtual switch display.
Default Live Speed
Choose Slow (1fps), Medium (5fps), Fast (10fps), Turbo (20fps) or Maximum as the default live
video speed. A lower live speed will use less CPU.
Pre Buffer For
Network Cameras
Enter the number of milliseconds to use as a pre buffer for live network cameras. This setting is
useful if there is latency in the live viewer due to a slow network connection.
Pre Buffer For Other
Cameras
Enter the number of milliseconds to use as a pre buffer for live analog cameras. This setting is
useful if there is latency in the live viewer due to a slow network connection.
Show Site and
Camera Name
When enabled, the DVR site and camera name will display in full
screen live mode. This option is for the Classic Mode Live
Viewer.
Maximize
When enabled, the Classic Mode Live Viewer window will
automatically open maximized.
Replace
Cameras
When enabled, choosing the Display All option when right-click
on a Site, will replace cameras in the Live Viewer, if not enabled,
the cameras will only display enough to fill the live viewer. This
option is for the Classic Mode Live Viewer.
Enable On-
Screen Display
on Start
When enabled, POS/ATM OSD will automatically display when a
camera that is set as a POS/ATM Priority camera is displayed in
the Live Viewer.