3xLOGIC VIGIL Client - Manual (Page 15)

3xLOGIC’s VIGIL Client - Users Guide Page 15
Doc# 12031914
Camera Names Tab
The Camera Names tab allows the ability to change the name of each camera.
To change the name of a camera, type in the new name beside the camera number and click either Apply or
OK.
Camera Settings Tab
The Camera Settings tab provides advanced configuration of camera parameters, recording mode and rates,
and recording CODECs.
Camera Select a camera to configure.
Default Camera Settings Set the currently selected camera back to default settings.
Default All Cameras Set all cameras back to default settings.
Camera Settings Sub-Tab
Brightness Adjusts the brightness of the video footage.
Sharpness Adjusts the sharpness of the video footage
Contrast Adjusts the contrast of the video footage.
Hue Adjusts the hue of the video footage.
Saturation U/
Saturation V
Adjusts the U and V color difference signals used in YUV color format for the video footage.
Note that not all cameras use a YUV color format, in which case, adjusting the Saturation U
slider will adjust the color saturation while the Saturation V slider will have no effect.
Noise Reduction
Reduces video noise on grainy video images. Warning: If this value it is set too high it may
have detrimental effects.