DeLorme PN-20 - Manual (Page 73)

72
To Modify the Units Settings
From the Device Setup Page, highlight the Units option and press ENTER. Press QUIT at any time
to return to the Device Setup Page.
• To modify the primary coordinates, highlight the Coordinates: Primary drop-down list and
press ENTER. Then, highlight the format and press ENTER.
• To modify the secondary coordinates, highlight the Coordinates: Secondary drop-down list
and press ENTER. Then, highlight the format and press ENTER.
• To modify the primary datum, highlight the Datum: Primary drop-down list and press ENTER.
Then, highlight the format and press ENTER.
• To modify the secondary datum, highlight the Datum: Secondary drop-down list and press
ENTER. Then, highlight the format and press ENTER.
• To modify the measures, highlight the Measures drop-down list and press ENTER. Then,
highlight the format and press ENTER.
• To modify the bearing, highlight the Bearing drop-down list and press ENTER. Then, highlight
the format and press ENTER.
Owner Information
The Owner Information screen allows you to enter text to identify your device.
1. In the text area, press ENTER to display the keyboard.
2. Use the keyboard to enter up to 255 characters on six lines. Then, highlight OK and press
ENTER.
3. To display the information when you turn on the device, highlight the Display at Startup
field and press ENTER.
OR
If the check box is selected and you do not want to show the information, highlight the field
and press ENTER to clear the check box.
4. Press QUIT to return to the Device Setup Page.
Units menu options