DeLorme PN-20 User Manual

Page 11

Using the Keyboard

The keyboard is accessible when you need to enter text, such as when editing a waypoint label.
Once the keyboard displays, use the arrow keypad to highlight the letter (A–Z), number (0–9), symbol

(+, -, /, &), or punctuation (period, comma, apostrophe, exclamation point) you want to use. In addition,

the following special functions are provided:

Moves the cursor one space to the left without deleting characters.

Moves the cursor one space to the right without deleting characters.

Changes the letters from lowercase to uppercase letters (the active case is shown in the

keyboard). This function toggles to all caps mode by pressing ENTER twice.

Moves the cursor one space to the left, deleting the character that was there.

Clears the content of the text field being edited.

Accepts the changes made to the text field and closes the keyboard.

Moves the cursor one space to the right, leaving a blank space.

Moves the cursor to the next line. This option can be used to type more than one line in a

comment field.

Charging the Earthmate GPS PN-20

If you are using a DeLorme-supplied RCR-V3 Li-Ion battery, you can charge the Earthmate GPS

PN-20 battery by connecting the USB end of the cable to your computer and the other end of the

cable to the Earthmate GPS PN-20. To charge the device with the USB cable, the device must be

powered on while connected. You cannot use the Earthmate GPS PN-20 to charge rechargeable AA

batteries.

Storing Data on the Earthmate GPS PN-20

The Earthmate GPS PN-20 stores waypoints, tracks, routes, and the base map data in its internal

memory. You can save maps that are transferred to the Earthmate GPS PN-20 in internal memory

or on a removable memory (SD/SDHC) card located under the battery compartment.

Tip:

Use multiple SD cards to

create a map library for long

trips or to have the entire state

in your pocket.

Tips:
• Press OUT to quickly high-

light the OK button.

• Press IN to delete one

character at a time.

• Press QUIT to cancel your

keyboard entries.

• For existing text, enter a let-

ter to replace the highlighted

content. To keep the existing

text but move the cursor

to the beginning/end of the

text, select the option

to move the cursor to the

beginning or to move the

cursor to the end of the text.

Keyboard screen