DeLorme PN-20 - Manual (Page 69)

68
The Device Setup Page
Use the Device Setup Page options to modify the default settings on the Earthmate GPS PN-20,
such as the battery type, backlight settings, and more.
Modifying the Device Preferences
To Modify the System Settings
To update GPS settings, WAAS status, battery type, and/or USB power setting, from the Device
Setup Page, highlight the System option and press ENTER. Press QUIT at any time to return to the
Device Setup Page.
• To update the GPS settings, highlight the GPS Setting drop-down list and press ENTER.
Select Normal, Power Saving, or Disable GPS and press ENTER.
• To update the WAAS Status, highlight the WAAS drop-down list and press ENTER. Select
the Enabled option to enable WAAS use or select the Disabled option to disable WAAS use.
Then, press ENTER.
Note: In most cases, a WAAS signal provides greater accuracy than a non-WAAS signal.
• To update the battery type, highlight the Battery Type drop-down list and press ENTER.
Select the battery type you are using and then press ENTER.
• To update the USB power setting, highlight the USB Power drop-down list and press ENTER.
Select the Enabled option to enable power from the USB port or select the Disabled option
to disable USB power.
To Modify the Display Settings
To update the device’s color scheme, backlight intensity, and/or backlight timer, from the Device
Setup Page, highlight the Display option and press ENTER. Press QUIT at any time to return to the
Device Setup Page.
• To modify the color scheme, highlight the Color Scheme drop-down list and press ENTER.
Highlight the color scheme you want and press ENTER.
• Spring (green)
• Summer (yellow)
• Autumn (orange)
Tip: When viewing the Device
Setup preferences, you can
highlight the Restore Factory
Defaults option and then press
ENTER to return all of the Earth-
mate GPS PN-20 settings to
their “out-of-the-box” status.
GPS Setting Options:
Normal:
GPS acquires satel-
lites and updates map once
per second.
Power Saving:
Reduces the
backlight to 10% intensity and
changes the backlight timer to
15 seconds.
Disable GPS:
GPS is inactive
while all other functions are
available, appropriate for
indoor use prior to departure.