Ask Proxima DP9250 - Manual (Page 38)

PICTURE POSITION ADJUSTMENT (COMPUTER MODE)
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
2. Press the POINT LEFT/'RIGHT BUTTON(s) to select POSITION and press the SELECT BUTTON. Another dialoa
box POSITION SETTING DISPLAY will appear. ||
3. Press the POINT DOWN BUTTON and a red arrow will appear. ^
4. Move the arrow to a desirable direction i ,
t
or i ) by pressing the POINT LEFT/RIGHT/UP/DOWN
BUTTON(s) and press the SELECT BUTTON to a desirable picture position.
5. You may want to store the settings to the memory so that you can recall them later. To store the settings, move
the arrow to Stored and then press the SELECT BUTTON, When you have stored the settings, ”OK ?” is displayed
for confirmation.
6. Move the arrow to Yes and then press the SELECT BUTTON. The stored settings are permanently held even if
the MAIN ON/OFF is switched off.
7. To quit the MENU, move the arrow to Quit and then press the SELECT BUTTON.
8. If you do not want to store the settings, move the arrow to Quit and then press the SELECT BUTTON. The settings
changed remains effective until the MAIN ON/OFF switch is turned off.
9. To recall the settings from the memory that you have stored, move the arrow to Reset and then press the
SELECTBUTTON. When you have reset the settings, ”OK ?" is displayed for confirmation. Move the arrow to Yes
and then press the SELECT BUTTON. You can adjust the settings again if needed.
MAIN MENU DISPLAY
POSITION SETTING
DISPLAY
_r Qu:t
.... .
.................
- r No ) . '
f
38 ■