Ask Proxima DP9250 - Manual (Page 34)

This projector is adjustable to different types of computer display signals based on VGA, SVGA, XGA or SXGA (Si
"COMPATIBLE COMPUTER SPECIFICATIONS" on the next page). If you set MODE SELECT to "COMPUTER^
projector wiil automatically process the incoming signal and project the proper image without any special ssH
Although this will work in most cases, you may be required to manually set the projector for some computer signal
the computer image is not reproduced properly, try the foilowing procedure and switch to the computer display moc
that you want to use.
1. Connect the COMPUTER to the PROJECTOR, and turn them on projector first
2. Set MODE SELECT to "COMPUTER MODE {1 or 2) This shows the current display mode initially detected by tt
projector in the system window. And "Current mode” display appears.
NOTE: 1. if the projector cannot discriminate or detect the input signal from the computer, the "Go PC adj." displi
appears.
NOTE: 2. If no input signal from the computer, the "No signal” display appears on the screen,
3. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
4. Press the POINT LEFT/RIGHT BUTTON(s) to select SYSTEM and press the SELECT BUTTON. Another dialc
box COMPUTER SYSTEM DISPLAY will appear.
5. Press the POINT DOWN BUTTON and a red arrow wilt appear.
6. If you want to change the current display mode, move the arrow by pressing the POINT UP/DOWN BUTTON(s) i
select one of the modes.
7. Press the SELECT BUTTON to change the display mode.
8. To quit the MENU, move the arrow to Quit and then press the SELECT BUTTON.
COMPUTER SYSTEM SELECT (COMPUTER MODE)
MAIN MENU DISPLAY
COMPUTER
SYSTEM
DISPLAY
CURRENT MODE
DISPLAY When the mark ( O- ) is displayed as BLACK,
computer system mode will be available on the
next page. Move an arrow to the mark (tl^ )
and press the SELECT BUTTON to show
computer system mode described on the next
page.
PC ADJUSTMENT
This is a special function that may be used when a computer image is not reproduced properly. (See the pages 39 ~
42 for more detail.)