Ask Proxima DP9250 - Manual (Page 28)

Press the VOLUME buttons (located on remote control unit or on the projector) to
adjust the volume. The volume display will be displayed on the screen for a few
seconds.
dressing volume (+) will increase volume and increase the number on the screen.
Pressing volume (-) will decrease volume and decrease the number on the screen.
SOUND MUTE FUNCTION
Pressing the MUTE button on the remote control unit will mute audio. Press the
MUTE button again to restore audio to its previous level. The mute display will be
displayed on the screen tor a few seconds.
ZOOM ADJUSTMENT
Press the ZOOM (A.) or (v ) buttons (located on remote control unit or on the projector) to
obtain your desired picture size.
For a larger picture, press (A) and for a smaller picture, press (\/)-
FOCUS ADJUSTMENT
Press the FOCUS (A ) or (\/) buttons (located on remote control unit or on the projector) for a
sharper, crisper picture,
DIGITAL ZOOM FUNCTION
Press the D. ZOOM button on the remote control unit The message "Quif is displayed to
indicate Digital Zoom mode. Digital zoom mode can be adjust the image size or pan the image.
To expand the image size, press SELECT (LEFT CLICK) button. The image is magnified by
degrees (Expand function).
To compress the image size, press RIGHT CLICK button. The size of image is reduced by
degrees {Compress function).
To pan the image, press POINT UP/DOWN/LEFT/RIGHT (JOYSTICK) button(s). The image
move to the direction indicated (panning function).
To cancel Digital Zoom mode, press other buttons (except NO SHOW button).
NORMAL PICTURE FUNCTION
'he normal picture level is factory preset on the projector and can be restored anytime by
pressing the NORMAL button on the remote control unit. The "Normaf display will be displayed
on the screen for a few seconds.
NO SHOW FUNCTION
Press the NO SHOW button on the remote control unit. The screen will change into black image
and the "NO SHOW" is displayed on the screen for a few seconds.
This function is cancelled when the NO SHOW button is pressed again or any other function
button is pressed,
P-TIMER FUNCTION
Press the P-TlMER button on the remote control unit. The timer display "00:00" appears on the
screen and the timer starts to count the time (00:00 to 59:59).
Press again the P-TIMER button to stop the timer. Then press the P-TIMER button to cancel the
P-TiMER function.
SOUND VOLUME ADJUSTMENT
1
l#ii ^Pprhe.- . 32
On
-i.
Focus
Quit
SiOrnUL.,
ipj.
r
ri'j. M'li-kT ••jt-tn;« M !^,-r
FREEZE PICTURE FUNCTION
Press the FREEZE button on the remote control unit, and the picture will remain on-screen. This function is cancelli
when the FREEZE button is pressed again or any other function button is pressed.
NOTE: Your computer or video equipment is not affected by this function, and will continue to run.
AUTO IMAGE FUNCTION
Press the AUTO IMAGE button on the remote control unit or on the projector. The item(s) indicated ”ON" in the AUl
IMAGE FUNCTION are adjusted automatically.
If all the items in AUTO IMAGE FUNCTION are "OFF", AUTO IMAGE SETTING display appears. If you wish to opera
the AUTO IMAGE FUNCTION, perform the steps 3 - 9 of "AUTO IMAGE FUNCTION" section on page 36.