Ask Proxima DP9250 - Manual (Page 19)

O LAMP REPLACEMENT INDICATOR
Light is orange when projection lamp is nearing end of service life.
TEMPERATURE WARNING INDICATOR
PlirtQh&c: rprfi whf^.n mtprnsl nrnlftntnr tp.mnAf Flashes red when internal projector temperature is too high,
READY INDICATOR
Light is green when projector lamp is ready to be turned on.
A LAMP POWER INDICATOR
Light is dim when the projector is on.
Light is brightened when the projector is in stand-by mode.
A LAMP POWER ON/OFF BUTTON
Used to turn projector on or off,
A COMPUTER SELECT BUTTON
Used to select computer mode (Computer 1 or Computer 2).
VIDEO SELECT BUTTON
Used to select video mode Video 1 or Video 2).
A VOLUME BUTTONS
Used to adjust volume.
A MENU BUTTON
This button will activate the MENU operation.
Use this button, the POINT UP/DOWN/LEFT/RiGHT buttons and the SELECT button to make adjustments to the
projector's setting in MENU operation.
II AUTO IMAGE BUTTON
Used to operate the AUTO IMAGE function.
€ ZOOM BUTTONS
Used to operate power zoom lens.
FOCUS BUTTONS
Used to operate power focus system.
POINT UP/DOWN/LEFT/RlGHT BUTTONS
To select an item on the MENU that you want to adjust. To select an item, move the arrow by pressing these
buttons (UP, DOWN. LEFT or RIGHT),
'ii SELECT BUTTON
This button has different functions depending on when used. This button is used to execute the item selected, to
increase or decrease the values in certain items such as CONTRAST or BRIGHTNESS.
• 19 ■