Color system select (video mode) – Ask Proxima DP9250 User Manual

Page 31

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

This projector is compatible with the five major broadcast video standards: PAL, SECAM, NTSC, NTSC 4.43 and

PAL-M (COLOR SYSTEMS), it automaticaily adjusts itself to optimize its performance tor the incoming video (Except
PAL-M). However, if the video signal is not strong enough to detect the video format, the projector may not

reproduce the proper video image. In case this happens, this projector allows you to choose a specific broadcast

signaf format.

COLOR SYSTEM SELECT (VIDEO MODE)

1. Connect the video equipment to the PROJECTOR, and turn them on projector first,

2. Set MODE SELECT to "VIDEO MODE".

3. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
4. Press the POINT LEFT/RJGHT BUTTON(s) to select SYSTEM and press the SELECT BUTTON. Another dialog

box COLOR SYSTEM DISPLAY will appear. The current COLOR SYSTEM is displayed in the system window.

5. Press the POINT DOWN BUTTON and a red arrow will appear.
6. To change the current COLOR SYSTEM, press the POINT UP/DOWN BUTTON(s) to move the arrow to a

desirable system and then press the SELECT BUTTON.

7. The setting changed remains effective until the MAIN ON/OFF switch is turned off.

MAIN MENU DISPLAY

English

COLOR SYSTEM
DISPLAY

■31