Sync keys – Ask Proxima DP2300 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chap'Cer 3 • Using the Desktop Projector
m
IMotie:
Holding the key down for several seconds initiates the
Cyclops light measurement sequence. For more information^
please refer to the Cyclops Users Guide.
fSlo^e: You cannot use Cyclops and Proxima’s Presentation
Control Sofrware at the same time. To disable Cyclops and use
the software, hold the MENU key (Control Panel) down when
you turn the projector power on. This procedure will not tuork with
the remote control. To re-enable Cyclops, turn the projector off
and then power it up again.
SYNC Keys
The SYNC keys are used to compensate for fine variations in the
timing of a computer's video signal. Adjust this setting if you see
uneven horizontal features, streaks or shimmering in a graphics
image. Press the upper or lower SYNC key until the image
stabilizes.
User's Guide
3-3