Ask Proxima DP2300 - Manual (Page 3)

9. Rotate the projector's focus ring for the clearest displayed image. Use the
tide screen image that appi^s when you first power up the projector.
NOTE: The Connector Panel's RS-232 port can be used with the
optional Cyclops interactive pointer system or Proxima’s
Presentation Control Software. Installation instructions are included
with Cyclops and the sofr«'are.
Control Panel
Sync
caiMTnou FUNCTION
BRI£3HTNESS Sncreases/decreasea the brightness of the prajented
i-mage.
SYNC ’ Compensates for fine variations in the timino of the
computer video signal.
MENU / 0 Press to dispiay the Menu Window.
Hold down for several seconds to initiate CoptionoU
Oyciope light meesurerhent aequence.
Hold down when powering up projector to disable
Gyciops.
LAMP Toggles the projection lamp QN/QFF.
ARROWS
<
Msk.es smeli adjustments to the projected image's
position.
Changes Menu Window settings when in MENU
mode;
- Press the Right4_eft arrow key to move to the
setting. ■
.. Press the Up/Dovm arrow key to change the
■ setting.