Ask Proxima DP2300 User Manual

Page 28

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Cheptep a • Deteiled Setup

ISiot;e: if you want to use your desktop computer without a

monitor, connect one of the supplied video terminators to the

short end of the Y-cable (marked MONITOR). Use the

appropriate terminator for your system. For IBM compatibles, use

part number C936; for Macintosh systems, use part number

C935.

Natet

oks/Laptops

Use the Y-cable appropriate to your system. For IBM

compatibles, use part number C454-6; for Macintosh systems, use

part number C464-6.

1. Turn off all power to your notebook or laptop computer and

the Desktop Projector.

2. Locate the Y-cab!e's common end, marked CPU/MAC II for

Macintosh systems or COMPUTER/VGA for IBM

compatibles. Plug it into the computer's monitor port.

3. Insert the Y-cable s large, 25—pin connector (marked LCD)

into the Desktop Projector's COMPUTER port.

4. Attach the appropriate video terminator to the short end of the

Y-cable (marked MONITOR). For IBM compatibles, use part

number C936; for Macintosh systems, use part number C935.

ISlote!

If you don’t get an image (i.e., your Desktop Projector is

unable to project an image at the same time that your laptop

computer displays a screen image), refer to your computer's

reference materials for information on how to switch between the

internal screen and the video port.

2-1 2 » User's Guide