Ask Proxima DP2300 - Manual (Page 2)

Quick 5et;up Procedures
1. Place che projector on a solid flat surface at a right angle (perpendicular) to
the projection screen and parallel to the floor.
2. Raise the cover assembly until it clicks into place.
3. Raise the mirror assembly into its fully open position.
For steps 4-7, select the appropriate procedure for your system:
Desktop Computers
4. Turn off the computer, monitor,
and Desktop Projector.
5. Unplug the monitor cable from
the computer and attach it to the
MONITOR end of the ’*r cable.
6. Plug the ''Y” cable’s
COMPUTER (or CPU) end into
the computer’s monitor port.
7. Insert the "Y” cable’s LCD end
into the projector’s COMPUTER
port.
Notebooks/Laptops
4. Turn off the computer and the
Desktop Projector.
5. Plug the ”Y” cable’s COMPUTER
(or CPU) end into the computer’s
monitor port.
6. Insert the 'Y"” cable’s LCD end
into the projector’s COMPUTER
port.
7. Attach the Macintosh or VGA
video terminator to the ”Y” cable’s
MONITOR end.
8. Power up the Desktop Projector and external monitor hefire turning on the
computer so that each display is properly sensed during the computer’s
boot-up sequence.