Preparation, Connecting the ac power cord, Ventilation – Ask Proxima Ultralight LX User Manual
Page 8: Connecting, Power, Cord, Caution
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PREPARATION
'W_.-
CONNECTING THE AC POWER CORD
This
projector uses nominal input votlages of
100-120 V
or 200-240 V AC,
The
projector
automatically
selects
the correct input voltage. It is
designed to
work
with
single-phase
power systems having
a
grounded neutral
conductor.
To
reduce the
risk
of electrical shock, do not
plug into any other type of
power
system.
Consult your authorized dealer or service station if your
are not sure of the type
of power
supply being
in
use.
Connect the projector with
the
peripheral equipment
before
turning the projector
on.
(Refer
to
pages 10 -15
for connection.)
A
CAUTION
For
the
safety, unplug the AC Power
Cord
when the
appliance is rtot used.
When this projector
is
connected to the outlet with
the AC Power Cord, the appliance is in Stand-by
Mode and
consumes
a little electric power.
Connerrf the AC power supply cord (supplied) to the pi
The socket-outlet must be rtear this equiprnent an<
easily accessible.
Prcjertor .sfdo (Female)
AC oiitiBt .= ce (Mj
VENTILATION
•w-'
This projector is equipped cooling fans for protection from overheating. Pay attention to the fotlowini
ensure the ventilation and avoid a possible risk
of
fire and malfunciion.
•
• Do not cover the vent slot
• Keep the rear grill at least one meter away from any object.
• Make sure that there is no object under the projector. An
obstacle under the projector may prevent the projector from
taking the cooling air through the bottom vent slot.
8