Ask Proxima Ultralight LX - Manual (Page 3)

IMPORTANT SAFETY INSTRUCTIONS
Ali the safety and operating instructions should be read before
the product is operated.
Read ail of the insiroctions given here and retain them for
later use. Unpiug this projector from AC power supply before
cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning.
Do not Use attachments not recommended by the
manuiacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or
Sable. The projector may fall, causing serious injury to a child
or adult, and serious damage to the projector. Use only with
a cart or stand recommended by the manufacturer, or sold
with the projector. Wall of shelf mounting shoufd follow the
manufacturer's instructions, and should use a mounting kit
approved by the manufacturers.
Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool, etc...
Slots and openings in the back and bottom of the cabinet are
provided for ventilation, to insure reliable operation of the
equipment and to protect if from overheating.
The openings should never be covered with cloth of other
materials, and the bottom opening should not be blocked by
placing the projector on a bed, sofa, rug, or other similar
surface. This projector should never be placed near or over a
radiator or heat register.
This projector should not be placed in a built-in insta(latior>
such as a book case unless proper ventilation is provided.
This projector should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supplied, consult your authorized dealer or
local power company.
Do not overload wall outlets and extension cords as this can
resuit in fire or electric shock. Do not allow anything to rest
on the povrer cord. Do not locate this projector where the
cord may be damaged by persons walking on it
Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock.
Never spiil liquid
of any kind on the projector.
Do not attempt to service this projector yourself as opening or
removing covers may expose you to dangerous voltage or
other
hazards. Refer all servicing to qualified service
personnel.
Unplug this projector from wall outlet and refer servicing to
qualified service personnel under the foilowlng conditions:
a. When the power cord or plug is damaged or frayed,
b. if liquid has been spilled into the projector.
c. If the projector has been exposed to rain or wafer.
d. If the projector does not operate normally by folio'
operating instructions. Adjust only those controls
covered by the operating instructions as in
adjustment of other controls may result in damage
often require extensive work by a qualified techr
restore the projector to normal operation.
e. If the projector has been dropped or the cabinet h
damaged.
f. When the projector exhibits a distinct chs
performance-this indicates a need for service.
When repiacemerrt parts are required, be sure the
technician
has used replacement parts specified
manufacturer that have the same characteristics
original part. Unauthorized substitutions may result
electric shock, or injury to persons.
Upon completion of any service or repairs to this pi
ask the service technician to perform routine safety ct
determine that the projector is in safe operating conditi
This projector is equtppec
grounding
type AC lins
Should you be unable to in
plug into the outlet, conta
electrician. Do not dels
safety purpose of this grc
type plug.
Follow all warnings and instructions madded on the proj
For added protection to the projector during a lightning
Of when it is left urrattended and unused for long pes
time, unplug it from the wall outlet. This will prevent c
due to lightning and power line surges.
An appliance and cart comb
should be moved with care,
stops, excessive force, and ?
surfaces may cause the apj
and cart combination to overft
If the projector is to be built into a compartment or s
enclosed, the minimum distances must be maintained.
Do not cover the ventilatiort slot on the projector.
Heat build-up can reduce the service life of your prc
and can also be dangerous.
20cm.
T
PROJECTOR
(FRONT}
1
SOcm 50cm 50a