Ask Proxima Ultralight LX - Manual (Page 30)

VIDEO MODE
^ELECTING
Direct Operation
Press the MODE button on the Top Control or the Remote Control Unit.
The input source is selected among VIDEO or COMPUTER. The
“Video" or “Computer* display will appear on the screen for a few
seconds.
v.ceo
Coo)pif;-ef
Menu Operation
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RiGHT buttons to select Video and press
the SELECT button.
3
Video
Ls^
N"SC
Í
SELECTÍNG COLOR SYSTEM
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select SYSTEM and
press the SELECT button. Another dialog box VIDEO SYSTEM
Menu wilt appear. (The display also appears by pressing the
SYSTEM button on the Top Control or the Remote Control Units.)
Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to “Auto“, and then press the SELECT button.
Auto
The projector automaticaliy defects the incoming Video system, and
adjusts itself to optimize its performance.
When the Video System is PAL-M select the system manually.
' 'EiBI! 'V'dia
NTSC
This box indicates
the sysiem being
selected.
A jj IO
PA
N'lSC
N•"304,43
PAL / SECAM / NTSC / NTSC4.43 / PAL-M
if the projector cannot reproduce the proper video image, it is
required to select a specific broadcast signal format among PAL,
SECAM, NTSC, NTSC 4.43, or PAL-M.
30