Citizen Systems CBM-253 User Manual
Page 98
CBM-253 User’s Manual
86
CITIZEN
GS c
[Name] Printing
of
counter
[Code]
<1D>H <63>H
[Function] Prints
the
consecutive
number counter.
•
Sets the current numerical value of the counter in the print buffer as printing data (line
of characters), and then counts up or counts down the counter depending on the
counting mode that has been set.
[Items requiring caution]
•
The format of the data when it is set in the print buffer will be according to the GS C 0
command.
•
The counting mode will be according to the GS C 1 or GS C ; commands.
When counting up:
•
If the counter value set using this command is out side the operation range of the counter
set using the GS C 1 or GS C ; commands the counter will be forcibly changed to the
minimum value by the execution of GS c.
When counting down:
•
If the counter value set using this command is outside the operation range of the counter
set using the GS C 1 or GS C ; commands, the counter will be forcibly changed to the
maximum value by the execution of GS c.