Citizen Systems CBM-253 User Manual
Page 60
CBM-253 User’s Manual
48
CITIZEN
ESC
∗∗∗∗
m n1 n2 [d] k
[Name] Specifying
of
the
bit
image
mode
[Code]
<1B>H <2A>H
[Defined ranges]
m = 0, 1, 32, 33
0
≤
n1
≤
255
0
≤
n2
≤
3
0
≤
d
≤
255
k = n1 + 256
×
n2
(m = 0, 1)
k = (n1 + 256
×
n2) x 3 (m = 32, 33)
[Function]
This command specifies the bit image of mode m with regard to the number of dots
specified by n1 and n2.
•
The number of dots for printing will be divided by 256, and the quotient will become
n2 with the remainder becoming n1, Accordingly, the number of dots in the horizontal
direction will be n1 + 256
×
n2.
•
In a situation where the bit image data input exceeds the dot positions that are capable
of being printed on one line, the portion of data in excess will be rejected for reading.
•
d is the bit image data. When the data is to be printed, the corresponding bit should be
set to 1 , and data which is not to be printed should have the corresponding bit set to 0.
•
The bit image mode selected using m will be as shown below :
Vertical direction
Horizontal direction
m Mode
Number of dots
Dot density
Dot density
Maximum
number of dots
0 8-dots
single
density
8
67 DPI
101 DPI
224
1
8-dots double density
8
67 DPI
203 DPI
448
32
24-dot single density
24
203 DPI
101 DPI
224
33 24-dot
double
density
24
203 DPI
203 DPI
448