Citizen Systems CBM-253 - Manual (Page 76)

CBM-253 User’s Manual
64 CITIZEN
ESC c 4 n
[Name] Selection of the effective paper end detector for stopping the printing
[Code] <1B>H <63>H <34>H
[Defined range] 0
≤
n
≤
255
[Function] Selects which of the paper end detector conditions will be used for the paper end signal
output.
Each bit of n will have the meanings shown in the table below.
Value
Bit Function
0 1
0 Journal near-end Disabled Enabled
1 Not defined
2 Not defined
3 Not defined
4 Not defined
5 Not defined
6 Not defined
7 Not defined
In this printer, only one type of paper near-end detector can be selected for the paper end
detection, and only the lowest bit of n will be effective.
[Items requiring caution]
When the printing stopping is set to enabled, the printing stopping position will be the
position set by the DSW1-5 and DSW1-6 switches. After the printing has been stopped,
the printer will change to the off-line condition.
[Initial value] n = 0