Citizen Systems CBM-253 User Manual
Page 104
CBM-253 User’s Manual
92
CITIZEN
GS C 2 n1 n2
[Name]
Setting of the numbering counter
[Code]
<1D>H <43>H <32>H
[Defined ranges]
0
≤
n1
≤
255
0
≤
n2
≤
255
[Function]
Sets the numbering value (consecutive numbering counter).
The value of the counter will be n1 + n2
×
256
[Items requiring caution]
When this command has been executed, the internal counter that counts the number of
repetitions while the counter value remains fixed will be cleared.
When counting up:
•
When the counter value set using this command is outside the operating range of the
counter set by GS C 1 or GS C ;, the counter will be forcibly changed to the maxiimum
value by the execution of GS c.
When counting down:
•
When the counter value set using this command is outside the operating range of the
counter set by GS C 1 or GS C ;, the counter will be forcibly changed to the maximum
value by the execution of GS c.
[Initial value]
n1 + n2
×
256 = 1
[Reference]
GS C 0, GS C 1 GS c, GS C ;
[Program example]
[Printing result]
Refer to the program example and the printing result for GS C 1 on page 91.