Citizen Systems CBM-253 - Manual (Page 30)

CBM-253 User’s Manual
18 CITIZEN
4.4 Loading the paper
1. Open the printer cover.
2. Cut the end of the roll of paper at right angles as shown in the figure.
3. Set the printing paper in the pape r holder as shown in the figure.
* Make sure that the paper roll rotates smoothly.
4. Make sure the winding direction of the paper roll is correct, then insert the end of the printing paper into the
paper inlet in the rear part of the printer. (Printing s urface should bc outside.)
5. Open the head-up lever (press it down forwards) to set the head up condition.
6. Use the knob to feed the printing paper up to the paper outlet.
7. Close the head-up lever. (Lift up the lever)
8. Close the printer cover.