Citizen Systems CBM-253 - Manual (Page 75)

CBM-253 User’s Manual
63 CITIZEN
[Function] Selects which of the paper end detector conditions will be used for the paper end signal
output.
Each bit of n will have the meanings shown in the table below.
Value
Bit Function
0 1
0 Journal near-end Disabled Enabled
1 Not defined
2 Not defined
3 Not defined
4 Not defined
5 Not defined
6 Not defined
7 Not defined
In this printer, only one type of paper near-end detector can be selected for the paper end
detection, and only the lowest bit of n will be effective .
[Items requiring caution]
This command will only be effective for parallel interface printers .
[Initial value] n = 1
[Program example]
LPRINT CHR$ (&H1B) + "c3" + CHR$ (0) ;
LPRINT CHR$(&H1B) + "c3" + CHR$ (1) ;
Situation in which the no paper signal is
output by the paper end detector.
Situation in which no paper signal is
output by the paper near-end detector.