Citizen Systems CBM-253 - Manual (Page 79)

CBM-253 User’s Manual
67 CITIZEN
ESC i
[Name] Full cutting
[Code] <1B>H <69>H
[Function] When the thermal paper has been selected. this command executes a full cut of the
printing paper. When label paper has been selected, line feeding of the label will be
carried out up to the cutting position (between the labels), and then the label will be cut
and ejected by the autocutter.
After ejection of the label, paper feeding will be carried out in the reverse direction to
move to the top of the next label.
[Items requiring caution]
This command will only be effective when input at the head of the line.
When thermal paper has been selected, make sure to feed the paper over 18mm before
cutting the paper. Because characters right after printing are left inside of the cutter.
[Program example] [Printing result]
LPRINT "AAAAA" ;
LPRINT CHR$(&H1B) + "J" ;
LPRINT CHR$ (150) ;
LPRINT CHR$ (&H1B) + " i" ;
LPRINT "AAAAA" ;
LPRINT CHR$(&H1B) + "J" ;
LPRINT CHR$ (150) ;
LPRINT CHR$ (&H1B) + " i" ;