5 interfaces, 6 data buffer, 7 paper and sensor – Citizen Systems CBM-253 User Manual
Page 22: 8 auto-cutter, 9 drawer kick-out connector, 10 electrical specifications
CBM-253 User’s Manual
10
CITIZEN
2. 5 Interfaces
Serial interface (RS-232C)
Parallel interface
2. 6 Data buffer
4KB or 45B (Selectable by dip switch setting)
2. 7 Paper and sensor
Detection of whether there is paper or not. (Mechanical u nit)
Near-end detection (Paper holder unit)
2. 8 Auto-cutter
Rotary system, full cut type (AC-7)
Note: Auto-cutter operation will not be possible while the printer is printing.
Note: After switching on the printer. carry out cutting one time in order to determine the position.
Note: In case of using thermal label paper, paste of label may stick to cutter blade.
2. 9 Drawer kick-out connector
Drawer kick-out drive terminal
×
2
Detection of drawer open/close terminal
×
l
2. 10 Electrical specifications
Power source voltage
AC 120V+10% 50/60Hz
AC
230V+10%
50/60Hz
(Selected according to the product destination)
Power cable
For North America:
3-pin UL cable
For Europe:
3-pin Class 1 cable
Power consumption
Approximately 20W (during character printing)
Approximately 40W (during full printing)