Cassette tapes, Usable tapes, Tape slack – Aiwa CX-N4000 U User Manual

Page 20: Minute or longer tapes, To prevent accidental erasure, To cancel demo mode b, To reenter demo mode, After a power interruption, Demo (demonstration) mode, Direct play functions

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

PREPARATIONS

BEFORE OPERATION

CASSETTE TAPES

Usable tapes

For playback, use normal (type I), CrOz (type II), and metal (type

IV) tapes.
The proper bias and equalization to suit the type of tape are
selected automatically.

For recording, use a normal (type I) tape.

Tape slack

Take up any slack in the tape with a pencil or similar tool before use.
Slack tape may break or jam in the mechanism. Q

120-minute or longer tapes

These are extremely thin and easily deformed or damaged. They
are not recommended.

To prevent accidental erasure

Break off the plastic tabs on the cassette tape after recording, with

a screwdriver or other pointed tool. -> [0

® Side A

® Tab for side A

To record on the tape again, cover the tab openings with cello

phane tape.

■DEMO

DEMO (DEMONSTRATION) MODE

When you first connect the AC cord, the display window demon
strates the unit’s preset functions.
When the power is turned on, the DEMO display is hidden by the
operation display. When the power is turned off, it is restored.

To cancel DEMO mode B

Press the DEMO button.

To reenter DEMO mode

Press the DEMO button again.

DEMO

After a power interruption

The unit enters DEMO mode.

DIRECT PLAY FUNCTIONS

You can turn the unit on and start playback immediately by pressing
one of the direct play buttons. Press the TUNER/BAND button to

listen to the tuner, the TAPE button to listen to a tape, or the CD

button or DISC DIRECT PLAY buttons to listen to discs loaded in

the disc compartment.

NOTE

If the power is on, pressing the CD button or the TAPE button

selects a source to be played. Press the button to start play.