Sewing a seam, Preparation, Place fabric under foot – SINGER 2001 TouchTronic User Manual

Page 47: Sewing with a newly wound bobbin

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

sewing a seam

PREPARATION

• Stitch; straight stitch I
• Stitch length; programmed or to suit application

or fabric

• Straight stitch needle plate
• Straight stitch foot

Thread machine in the usual way.

PLACE FABRIC UNDER FOOT

Most fabrics can be placed under the foot by
raising the presser foot lifter A to its normal up
position 1, where it locks. When using bulky

fabric, multiple fabric layers, or an embroidery

hoop, raise the presser foot lifter to the high
rise position 2, thus increasing the space be

tween foot and needle plate. Hold presser foot

lifter in position while placing fabric under the
presser foot.

• Lower presser foot lifter all the way down

and start to sew.

SEWING WITH A NEWLY WOUND

BOBBIN

When starting to stitch at the fabric edge:

• Position needle in very edge of fabric, by

turning the hand wheel toward you.

• Lower the presser foot and stitch. Thread

will lock over fabric edge.

When starting to stitch away from fabric edge:

• Leave presser foot in its upper position.

• Pull thread back under presser foot and cut.

• Position needle in from fabric edge, then

lower the presser foot and stitch.

Backstitch to lock stitching by touching the
reverse stitch symbol [i while sewing.
Only a few stitches are needed to lock stitch
ing line in place. Do not go over edge of fabric.

This manual is related to the following products:

TouchTronic 2001