Getting ready to sew, Choosing and changing accessories, Changing presser feet – SINGER 4022 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2. Getting Ready to Sew
Choosing and Changing
Accessories
CAUTION:
Disconnect
the
power
line plug from the socket outlet
when
changing
needles,
feet,
or
needle plates, or when leaving the
machine
unattended.
This
elimi
nates the possibility of starting the
machine
by
accidentally
pressing
the speed controller.
Changing Presser Feet
Removing Presser Foot with Shank
® Raise needle to highest position
by turning the hand wheel toward
you.
® Raise presser foot.
0
Loosen presser foot screw A and
remove the shank, guiding it to
the right.
Replacing Presser Foot with Shank
« Hook shank around the presser
bar, guiding it to the left and
tighten presser foot screw A.
NOTE: Insert the edge of a coin in
the slot of the presser foot screw to
loosen it and to tighten it securely.
5