SINGER 4022 User Manual
Page 53
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4022
B
CAUTION:
Before
cleaning
your
machine,
disconnect
power
lino
plug from your socket outlet.
Interior Feed Area — 4022
To clean and oil inside feed area,
remove cover. Using a large screw
driver, remove screws A and B.
Periodically apply a drop of oil only
to areas indicated after cleaning.
Interior Feed Area — 4012
To clean and oil feed area, tilt
machine on Its side, and periodically
apply a drop of oil only to indicated
areas.
Apply a few drops of oil to oiling
points, and with presser foot up, run
machine for a few minutes. Then
wipe up any excess oil
CAUTION: Do not attempt to adjust
the motor belt. Contact your nearest
Service Centre should any adjust
ment be required.
4012
51