SINGER 4022 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Mock Overedge
This finish is appropriate for bulky
knits, fine tricots and fabrics that
curl or fray.
Method 2
® Make a test sample.
® Baste the garment together on
the seam line and fit in the usual
way.
After making any necessary ad
justments, suggested in Method
1, place seam under grosser foot.
Stitch so that the stitches on the
left side of the pattern penetrate
the basted seam line.
® Press after stitching and trim
away excess fabric to produce, a
narrow seam edge. When the
seam supports the garment, omit
the trimming step and press seam
open in the usual way.
Overedged Seam Finish
® Pattern Selector: 7
® Stitch Width: S
® Stitch Length: 3-4
® General Purpose Needle Plate
® General Purpose Foot
o Trim seam edges evenly.
9 Place stitching over the trimmed
edge of the seam allowance as
illustrated.
37