Call-me-first mode – Nortel Networks NN42030-102 User Manual

Page 51

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advanced features

When the MCC 3100 for Nokia is configured for Direct mode, you can
switch from Direct mode to Call-me-First mode for advanced calls. For

more information, see “Toggling between call modes” on page 51.

Call-me-First mode

In Call-me-First mode, your calls are completed in two steps. First the

enterprise telephony system calls you. After you answer, the enterprise

telephony system calls the other party. After the other party answers, you

are connected and can begin talking. For more information, see Figure 4
"Call-me-First mode” on page 51.

Figure 4: Call-me-First mode

You change between the two calling modes by using Options, Change

Call Setup, or by changing your Call Setup parameters (see
“Configuring your Call Settings” on page 34).

Call Intercept

The MC 3100 can intercept calls made from the native Nokia dialer so

that calls can go through the MC 3100. Use the Options pane to control
the use of the native Nokia dialer. The Options pane displays the status of
the feature. Select the Call Intercept entry to toggle the feature.

• When Call Intercept is on displays, the MC 3100 intercept calls

made from the native Nokia dialer.

Nortel Mobile Communication Client 3100 for Nokia User Guide 51