Nortel Networks NN42030-102 - Manual (Page 28)

MCC 3100 for Nokia configuration
The First Time Settings pane appears.
5. On the First Time Settings pane, configure the following parameters.
— In the Username field, enter user name provided by your system
administrator.
— In the Password field, enter the password provided by your
system administrator.
— In the Primary Server Address field, enter the address provided
by your system administration in the format:
xxx.xxx.xxx.xxx
— In the Primary Server Port field, enter the port number provided
by your system administrator. The default value is 8443.
— In the Use Secure Connection field, select On or Off. The
default value is Off.
— In the WLAN Access Point field, select from a list of available
WiFi access points already specified on your device.
— In the Cellular Access Point field, select from a list of available
Cellular access points specified on your device.
— In the Cell Number field, enter your cell number as it would be
dialed from your Enterprise telephone system.
6. Select Login.
The MCC 3100 application logs on to the system.
7. Select Yes and then OK in response to the prompts.
If logon is successful, the remaining configuration settings are
automatically downloaded from the MCG 3100 and you can begin
using the MCC 3100 for Nokia to place calls and send instant
messages.
Note: If you are using a GSM device, your service provider may
require you to program an Access Point Name (APN), username and
password on the device under Tools, Settings, Connection, Access
points.
Configuring an Enterprise WLAN Access Point
Use this procedure to configure an access point, if one is not already
configured on your device..
NN42030-102 MC 3100 3.1 Standard 04.03 November 2009 28