Nortel Networks NN42030-102 - Manual (Page 27)

MCC 3100 for Nokia configuration
MCC 3100 for Nokia configuration
This section contains the following topics:
• “Initial configuration” on page 27
• “Configuring the client settings” on page 29
Initial configuration
The first time you start the Mobile Communication Client 3100 for Nokia
(MCC 3100) after you install it on your Nokia, you must configure the
following parameters provided by your system administrator:
• your account username and extension
• your account password
• the Mobile Communication Gateway 3100 (MCG 3100) IP address
• your Nokia telephone number
The next time you start MCC 3100 for Nokia, you automatically log on to
the network.
The following procedure details the steps required to configure the initial
Nokia parameters.
Configuring initial Nokia parameters
1. Obtain your user name, password, MCG 3100 IP address, and Nokia
telephone number from your system administrator.
2. Start the MCC 3100 for Nokia application. For more information, see
“Starting and exiting the MCC 3100 for Nokia application” on
page 41.
Note: If the Main screen appears, then your basic settings are
already configured, and you can start using the application.
3. Click the Menu key.
4. From the Menu pane, select the Applications folder and then select
the Nortel MCC 3100 for Nokia application icon.
Nortel Mobile Communication Client 3100 for Nokia User Guide 27