Nortel Networks NN42030-102 User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Software installation

10. Use the browser to locate the software files you extracted, and select

mcc3100_ip1_.sisx.

11. Select Options, Install.

12. Follow the prompts to install the SISX file.

Note: For best performance, install the application to the phone

memory and not to a memory card.

13. Optionally, move the MCC 3100 for Nokia application icon to the

menu screen of your Nokia device. For more information, see

Note: If an error occurs during installation, you may see one of the

following messages: Authorization failed; Incorrect certificate; Invalid

jar. file. You need to restart the device and follow the installation

procedures again.

Upgrading the MCC 3100 for Nokia software over

the air

Use this procedure to upgrade the MCC 3100 for Nokia software over the

air.

Upgrading the software over the air from your Nokia device

1. On your Nokia device, if the MCC 3100 for Nokia is running, select

Quit.

2. Press the Menu key.

3. On the Menu screen, select Web.

4. Use the following address format to access the user portal Web page:

Note: Obtain the actual hostname or IP address and port settings