Sears 831.159341 - Manual (Page 5)

4. slide
the Brace (29) onto the threaded boh protrud*
ing from the Tower Frame (10). Thread a 3/8'
. h^oclc Nut (6) onto the threoded bolt. Do not tight*
en the Nyfocic Nut yet.
Place your foot on the extension and slightly roise
the front of the Tower Frame (10). Align the lower '
end of the Brace (29) with the Indicated 3/8' x
2 1 /2' Corrioge Bolt (1). Lower the Tower Frome so
the Broce slides onto the Corrioge Bolt. Thread a
3/8' Nut (2) with a 3/8' lockwosher (3) onto the
Corrioge Bolt. Do not tighten the Nut yet.
5. With the help of a second person, lift the Upright (9)
ond lower it onto the two indicated 3/8' x 2 1 /2'
Carriage Bolts (1) in the Reor Bose (8). Thread a
3/8' Not (2) and 3/8' Loclcwosher (3) onto each
Carriage Bolt. Do not tighten the Nuts yet.
Attoch the Front Bose (7) to the Upright (9) with two
3/8'x3/4'Bolts (31).
^ Tighten the 3/8' Nylocic Nut (6) attached in assem­
bly step 4, ond the seven 3/8' Nuts (2) attached in
ossembly steps 3 through 5.
^loch the Foot Ploie (102) to the Upright (9) with
tvwj 3/8' X 3/4' Bolts (31) ond 3/8' Nylocic Nuts
(6).
With the help of a second person, lift the Front Bose
(7). Peel the boclung off three Rubber Pads (48).
Press two onto the underside of the Front Bose in the
indicated locations, and one onto the underside of
the Upright (9). Lower the Front Bose.
Press two Rubber Pods (48) onto the Rear Bose (8)
in the same manner.