Sears PRO-FORM 831.23744.1 User Manual
Elliptical exerciser
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of contents
Document Outline
- User’s Manual
- TABLE OF CONTENTS
- WARNING DECAL PLACEMENT
- IMPORTANT PRECAUTIONS
- BEFORE YOU BEGIN
- ASSEMBLY
- Assembly requires the included hex keys and your own Phillips screwdriver wrench , and rubber mallet i ■
- Repeat this step for the Left Frame Cover (48).
- 4. Tip: Be careful not to pinch the Wire Harness (100) during this step.
- 6. Tip: Be careful not to pinch the wires during this step.
- Repeat this step for the other side of the eiiipticai exerciser.
- Repeat this step for the other Pedal Arm Axle (not shown).
- Repeat this step for the other side of the elliptical exerciser.
- Repeat this step for the Left Upper Body Arm (8) and the Left Upper Body Leg (6).
- HOW TO USE THE ELLIPTICAL EXERCISER
- HOW TO MOVE THE ELLIPTICAL EXERCISER
- HOW TO EXERCISE ON THE ELLIPTICAL EXERCISER
- FEATURES OF THE CONSOLE
- 1. Press the Resistance decrease button or begin pedaling to turn on the console.
- 2. Select the manual mode.
- 3. Begin pedaling and change the resistance of the pedals as desired.
- 4. Follow your progress with the displays.
- The center display—
- The right display—
- 5. Measure your heart rate if desired.
- 6. Turn on the fan if desired.
- 7. When you are finished exercising, the consoie wiii turn off automaticaiiy.
- 1. Turn on the console.
- 2. Select a cross training workout.
- 3. Begin pedaiing to start the workout.
- Perform the first strength exercise when prompted.
- 5. Continue the cross training workout.
- 6. Follow your progress with the displays.
- 7. Measure your heart rate if desired.
- 8. Turn on the fan if desired.
- 9. When you are finished exercising, the console will turn off automatically.
- 1. Turn on the console.
- 2. Select a target toning workout.
- 3. Begin pedaiing to start the workout.
- 4. Follow your progress with the displays.
- 5. Measure your heart rate if desired.
- 6. Turn on the fan if desired.
- 7. When you are finished exercising, the console will turn off automatically.
- 1. Turn on the console.
- 2. Select a calorie goal workout.
- 3. Begin pedaiing to start the workout.
- 4. Follow your progress with the displays.
- 5. Measure your heart rate if desired.
- 6. Turn on the fan if desired.
- 7. When you are finished exercising, the console will turn off automatically.
- 1. Turn on the console.
- 2. Select the high performance workout.
- 3. Begin pedaiing to start the workout.
- 4. Follow your progress with the displays.
- 5. Measure your heart rate if desired.
- 6. Turn on the fan if desired.
- 7. When you are finished exercising, the console will turn off automatically.
- MAINTENANCE AND TROUBLESHOOTING
- EXERCISE GUIDELINES
- Get it fixed, at your home or ours!
- 90 DAY FULL WARRANTY