Winco DSE7300 Series - Manual (Page 7)

DSE Model 7000 Series Control & Instrumentation System Operators Manual
Part No. 057-074 7000 Series OPERATING MANUAL ISSUE 5 15/10/2009 ADM 7
2 INTRODUCTION
This document does not contain operating instructions for the DSE7500 series synchronising and load sharing
controllers. This is contained within DSE publications - part numbers 057-088 (DSE7510), 057-089 (DSE7520) and
057-090 (DSE7560).
This document details the installation and operation requirements of the DSE7200 and DSE7300 Series modules,
part of the DSEControl® range of products.
The manual forms part of the product and should be kept for the entire life of the product. If the product is passed or
supplied to another party, ensure that this document is passed to them for reference purposes.
This is not a controlled document. You will not be automatically informed of updates. Any future updates of this
document will be included on the DSE website at www.deepseaplc.com
The DSE7000 series is designed to provide differing levels of functionality across a common platform. This allows
the generator OEM greater flexibility in the choice of controller to use for a specific application.
The DSE7000 series module has been designed to allow the operator to start and stop the generator, and if
required, transfer the load to the generator either manually (via fascia mounted push-buttons) or automatically.
Additionally, the DSE7320 automatically starts and stops the generator set depending upon the status of the mains
(utility) supply.
The user also has the facility to view the system operating parameters via the LCD display.
The DSE7000 module monitors the engine, indicating the operational status and fault conditions, automatically
shutting down the engine and giving a true first up fault condition of an engine failure by a COMMON AUDIBLE
ALARM. The LCD display indicates the fault.
The powerful ARM microprocessor contained within the module allows for incorporation of a range of complex
features:
•
Text based LCD display (supporting multiple languages).
•
True RMS Voltage, Current and Power monitoring.
•
Engine parameter monitoring.
•
Fully configurable inputs for use as alarms or a range of different functions.
•
Engine ECU interface to electronic engines.
Using a PC and the Configuration Suite software allows alteration of selected operational sequences, timers and
alarms.
Additionally, the module’s integral fascia configuration editor allows adjustment of a subset of this information.
A robust plastic case designed for front panel mounting houses the module. Connections are via locking plug and
sockets.