Winco DSE7300 Series - Manual (Page 59)

DSE Model 7000 Series Control & Instrumentation System Operators Manual
Part No. 057-074 7000 Series OPERATING MANUAL ISSUE 5 15/10/2009 ADM 59
5.4.2 ENGINE
Contains instrumentation gathered about the engine itself, some of which may be obtained using the CAN or other
electronic engine link.
•
Engine Speed
•
Oil Pressure
•
Coolant Temperature
•
Engine Battery Volts
•
Run Time
•
Oil Temperature*
•
Coolant Pressure*
•
Inlet Temperature*
•
Exhaust Temperature*
•
Fuel Temperature*
•
Turbo Pressure
•
Fuel Pressure*
•
Fuel Consumption*
•
Fuel Used*
•
Fuel Level*
•
Auxiliary Sensors (If fitted and configured)
•
Engine Maintenance Due (If configured)
•
Engine ECU Link*
*When connected to suitably configured and compatible engine ECU. For details of supported engines see
‘Electronic Engines and DSE wiring’ (DSE Part number 057-004).
Depending upon configuration and instrument function, some of the instrumentation items may include a tick
icon beside them. This denotes a further function is available, detailed in the ‘operation’ section of this document.
Example:
The tick icon denotes that manual fuel pump control is
enabled in this system.
Press and hold to start the fuel transfer pump, release to
stop the pump. This is further detailed in the section entitled
‘operation’ elsewhere in this document.