Toa D-901 KR - Manual (Page 81)

81
[Delay Time Settings]
Setting Item Setting Range
Delay Time 0 – 682.6 ms, 0.021 ms steps
ON/OFF ON, OFF
Filter Type Setting Item Setting Range
Parametric Equalizer Gain –15 to +15 dB (0 dB), 0.1 dB steps
(PEQ) Center frequency 20 Hz – 20 kHz (1 kHz), 1/24 octave steps
Q 0.267 – 69.249 (96 points)
High-pass Filter (HPF) Cutoff frequency 20 Hz – 20 kHz (1 kHz), 1/24 octave steps
Slope 6 dB/oct 12 dB/oct
Q 0.500 – 2.563 (51 points)
Low-pass Filter (LPF) Cutoff frequency 20 Hz – 20 kHz (1 kHz), 1/24 octave steps
Slope 6 dB/oct 12 dB/oct
Q 0.500 – 2.563 (51 points)
High Shelving Filter Gain –15 to +15 dB (0 dB), 0.1 dB steps
Rolloff frequency 6 – 20 kHz, 1/24 octave steps
Low Shelving Filter Gain –15 to +15 dB (0 dB), 0.1 dB steps
Rolloff frequency 20 – 500 Hz, 1/24 octave steps
Horn Equalizer (Horn EQ) Gain 0 to +18 dB, 0.5 dB step
Notch Filter Center frequency 20 Hz – 20 kHz (1 kHz), 1/24 octave steps
Q 8.651, 9.889, 11.538, 13.847, 17.310,
23.081, 34.623, 69.249
All-pass Filter Center frequency 20 Hz – 20 kHz (1 kHz), 1/24 octave steps
Q 0.267 – 69.249 (96 points)
ON/OFF ON, OFF
[Filter Settings]
[Feedback Suppression Function Settings]
Parameter Setting Item Setting Range
DYNAMIC Dynamic mode ON/OFF ON, OFF
AUTO START Auto mode activation
AUTO : DYNAMIC Number of the filters used in each mode AUTO : 0 – 9 (7), DYNAMIC : 3 – 12 (5)
CLEAR DYNAMIC Initialization of Dynamic mode filter
CLEAR AUTO Initialization of Auto mode filter
[Feedback Suppression Filter Setting]
Setting Item Setting Range
Gain –15 to +15 dB, 0.1 dB steps
Center Frequency 20 Hz – 20 kHz, 1/24 octave steps
Q 0.267 – 69.249 (96 points)
Note: Automatically set by the D-901 Mixer's software.