Toa D-901 KR - Manual (Page 25)

25
(10) Comp ON/OFF button
Displays the ON/OFF setting status of the compressor in each channel. Press this button to turn on or off
each compressor.
8.4.2. Auto-leveler function settings (available only to the input channel)
(1) (2) (4) (5) (6) (7) (8) (3)
(1)
(4)
(5)
(6)
(7)
(8)
Clicking the [Leveler All] tab causes the setting screen for all channels set to auto-leveler mode to appear.
(1) Mode selection button [Comp/Leveler]
Displays the compressor/auto-leveler mode. Mode selection can be performed for individual channels.
All input channels are set to compressor mode by default. Press this button to select the auto-leveler
mode, and press it again to select the compressor mode.
Note
At the time of mode selection, each parameter of compressor and auto-leveler functions returns to the
initial value.
(2) Auto-leveler target level handle
Click and drag this handle up and down to change the auto-leveler target level.