Toa D-901 KR - Manual (Page 79)

79
[Auto-Leveler Settings]
Setting Item Setting Range
Target Level –20 to +10 dB (0 dB), 1 dB steps
Maximum Gain 0 to +20 dB (+6 dB), 1 dB steps
Attack Time 10, 20, 50, 70, 100, 120, 150, 200, 250, 300, 500, 700 ms,
1, 1.2, 1.5, 2, 2.5, 3, 5, 7, 10 s
Release Time 100, 120, 150, 200, 250, 300, 500, 700 ms,
1, 1.2, 1.5, 2, 2.5, 3, 5, 7, 10 s
ON/OFF ON, OFF
[Compressor Settings]
Setting Item Setting Range
Threshold Level –20 to +20 dB (0 dB), 1 dB steps
Ratio 1:1, 2:1, 3:1, 4:1, 8:1, 12:1, 20:1,
∞:1
Attack Time 0.2, 0.5, 0.7, 1.0, 1.5, 2, 3, 5, 7, 10, 20, 50, 70, 100, 120, 150, 200,
250, 300, 500, 700 ms
1, 2, 3, 5 s
Release Time 10, 20, 50, 70, 100, 120, 150, 200, 250, 300, 500, 700 ms
1, 2, 3, 5 s
Gain –
∞ to +10 dB (0 dB), 1 dB steps
ON/OFF ON, OFF
[Effect (Echo) Settings]
Setting Item Setting Range
Echo Gain –
∞ to 10.0 dB (–10 dB), 1 dB steps
Feedback Ratio 0 – 99% (30%), 1% steps
Feedback Delay 0 – 682 ms (120 ms), 1 ms steps
Initial Echo (Pre-) Delay 0 – 682 ms (80 ms), 1 ms steps
Low-pass Filter Frequency 20 Hz – 20 kHz (3.75 kHz)
Q 0.500 – 2.563 (51 points)
ON/OFF ON, OFF